Warning: Speller Dictionaries were not found, you will be unable to spell-check any documents!
An error occurred while attempting to print your document.
Your document could not be printed because the selected printer cannot be opened.
Your document could not be printed because of insufficient free memory. Try quitting other applications or giving this one more memory.
This Demo Manual is Read & Print Only. You will NOT be able to edit the demo manual, though you can view and print it normally.
To get a normally editable script, choose New from the File menu, or load any script that you’ve written in this demo.
Bad value for ^0.
Value for ^0 is too big.
Value for ^0 is too small.
The key “^0” can’t be used by itself as a keyboard shortcut, but you could combine it with a modifier key.
The keystroke “^0” can’t be used as a keyboard shortcut unless you also use the Command or Control modifier key.
The keystroke “^0” can’t be used as a keyboard shortcut because it is reserved for system use.
The keystroke “^0” is already in use as a keyboard shortcut for the “^1” command.
Because this is the demo, you can ONLY print Breakdowns for evenly numbered scenes and each category will list no more than two items. The full program, of course, does not have these limitations.
You haven’t selected any Scenes!
You haven’t Selected Any Names!
Wait, you never even looked at the payment section! Better check it out.
Sorry, but you MUST fill out the ^0 field for me to be able to process the order.
No document to change names in!
There are no known character names to change in this document.
Since you cancelled the character list calculation, the scenes toward the end of the script may have out of date scene character lists.
Sorry, you have already used 25 custom Script Note colors, and that’s all I can handle.
Do you REALLY want to UNLOCK your LOCKED scenes?
Do you REALLY want to UNLOCK your LOCKED pages?
The spelling support file “^0” is missing, so I can’t edit that dictionary.
Error deleting words from user dictionary.
Error adding to user dictionary.
Dictionary is damaged.
Memory error.
User dictionary can store no more words.
A title page cannot be opened alone. Open a script, open the Title Page Publisher, and then you can load in the title page file.
Unable to open that document, ^0.
Sorry, there was not enough application memory to open that document. Try closing other documents or giving me more memory.
Do you really want to re-open the script “^0”, which is already open? Two windows on one script can be confusing and lead to data loss.
That page number is not in the document.
You can’t change the type of multiple elements.
Unable to save “^0”, ^1.
Sorry, you can only have 5 levels of revision marks.
You have defined an alias but not the corresponding text.
When there is an alias, the combined length of the main and alias text can be at most ^0 letters.
You have defined substitution text but nothing to substitute it for.
For “As Entered” pairs, the combined length of the main and alias text can be at most ^0 letters.
For “All Caps” pairs, the combined length of the main and alias text can be at most ^0 letters.
Before inserting a replacement code, you need to click in the text, so I will know where to insert the code.
Before inserting style replacement codes, you need to select some of the text, so I will know where to insert the codes.
Load the Demo Manual?
Failed to save the Movie Magic Scheduling file (^0).
Unabled to delete file, ^0.
Error saving text, ^0.
Error loading script format, ^0.
Done tagging “^0”.
Found: ^1
Tagged: ^2
Changed headers on ^0 pages.
No displayed item was selected!
No hidden item was selected!
Sorry, the script only has room to hide ^0 of the ^1 locations you chose to hide. You’ll have to hide fewer locations, or make the locations shorter.
Sorry, the script only has room to hide ^0 of the ^1 names you chose to hide. You’ll have to hide fewer names, or make the names shorter.
You are now ready to print the final ^0 and then start making changes for ^1.
The IE3885.STM program is not in the same folder as ^0.
Sorry, an error occurred while trying to import, code ^0.
There is not enough memory to open the file ^0, try giving ^1 more memory.
Error reading the file ^0, ^1.
The “^0” file is already open. Perhaps you already have a copy of ^1 running.
The “^0” file cannot be opened for writing. Perhaps it is locked.
Unable to open or create “^0”, ^1.
Error saving preferences (^0)
Insert the script with a title page in the printer, in appropriate order so that it will feed sequentially, starting with the title page.
Click OK when you are ready to print.
The script notes on page ^0 will not fit on one page, so they will be truncated.
Please insert the title page so that I can print the "notes from page ^0 on its reverse side.
Please insert page ^0 so that I can print the notes from page ^1 on its reverse side.
^0 was quit abnormally. Do you want to recover any timed backups?
Pardon me, but ^0 could use your attention.
Please move the “^0” application back into the folder “^1” where it belongs. You can put an alias on the desktop instead.
Unable to open the script “^1”, ^0.
The Name Bank is not included with the demo, to minimize download time.
Can’t bring the Finder to the front, ^0.
The script comparison tool is not included with the demo version of ^0, to minimize download time.
The CS3885.STM program is not in the same folder as ^0.
Sorry, an error occurred while trying to compare files, ^0.
Before you can generate Set List containing scene character lists, you will need to generate character lists in the script.
Should I regenerate all scene character lists?
Error printing set list, ^0.
Unable to import shortcuts, ^0.
Unable to export shortcuts, ^0.
Error saving keyboard shortcuts, ^0.
Failed to print shortcuts, ^0.
Since I can’t understand the voice assignments file, shall I delete it and let you start anew?
Error finding voice assignments file, ^0.
Error saving voice assignments, ^0.
Be reasonable, a file name can’t be empty.
That voice assignment file already exists. If you want to use an existing file, use the Select button instead.
Can’t use that name, ^0.
Can’t open a speech channel, ^0.
Unable to get voice assignments, ^0.
Error on line ^0, no =.
Error on line ^0, could not find a voice “^1”.
Error on line ^0, could not make sense of the left-hand part of the line.
The file “^0” already exists and I can’t delete it, ^1.
The file “^0” can’t be created, ^1.
Failed to save a temporary copy of the document, error ^0.
Sorry, an error occurred while trying to export, ^0.
Failed to create the temporary ^0 file.
Failed to create the ^0 file.
Error opening temporary ^0 file.
Can’t launch “^0”, ^1.
My helper “^0” didn’t understand me, you may need to update it.
Error talking to “^0”, ^1.
The script specifies the font “^0”, which is not installed on your computer. Please choose a different font.
Unable to make sample image, ^0.
An error occurred when getting the path to the list, ^0.
An error occurred when saving the modified distribution list, ^0.
An error occurred when opening the distribution list, ^0.
Error reading file, ^0.
The file you chose was too big. Only the first 255 letters of it will be copied to the text field.
The distribution list “^0” is missing.
Unable to update the distribution database, ^0.
There was an error reading the distribution list, ^0.
Error adding name to distribution list, ^0.
You have selected Portrait printing, but your printer is currently set up for Landscape. Please change the printer orientation to Portrait.
You have selected Landscape printing, but your printer is currently set up for Portrait. Please change the printer orientation to Landscape.
Error during copy protection checks, ^0.
Unexpected printer resolution of ^0, try changing Page Setup.
No printer has been selected. For best results, select a printer in the Chooser and then do a Page Setup in each open document.
I can’t find a character name at the start of this speech!
The text “^0” could not be found.
^0 occurrences replaced.
Should I REALLY delete this scene?
If you select YES, then all following scenes will be renumbered accordingly.
The script is now ready for the ^0 revision. Opening the Title Page Publisher so that you can update the revision color and draft date.
I was not able to find a good place to break page ^0, so that page probably extends below the bottom margin. Please break up some elements or remove keep-together properties on that page.
Really remove the page break?
This page has current revision marks, so cheating the header on this page will not have any effect.
This page is considered revised by virtue of a change at the end, such as text having been pulled down to the next page. Are you sure you want to override it?
Replace the old revision color (^0) in the header with the new color (^1)?
You have changed the draft revision color but there is neither an automatic color code nor the new color as text in the new header!
This will result in the page’s reported color being out of sync.
Continue anyway?
Sorry, a fully password-protected script cannot be opened in the demo.
Error loading user lists, ^0.
Unable to open user dictionary “^0” (^1).
Failed to initialize spelling checker (^0), is the ^1 file missing?
Unable to open main dictionary “^0” (^1).
Can’t find main dictionary, “^0”.
Error creating user dictionary, ^0.
The Thesaurus file is not included with the demo version of ^0, to minimize download time.
The Thesaurus file is not in the same folder as ^0.
Error consulting the Thesaurus, ^0.
The first header line is more than 120 characters long.
The second header line is more than 120 characters long.
When you password protect scripts, you will be solely responsible for the consequences, including any loss of work or money due to any inability to access any file. Recovery of lost passwords will require sending the file to us and may incur a fee.
Are you sure you want to password protect your scripts?
You haven’t selected any page ranges!
I can’t find any scenes with those characters!
I can’t find any scenes with all those characters!
There is a script note that is too big to fit on one page. Please break it up.
A color name can be at most 50 letters long.
A color name must not be empty.
A color name must not contain a comma.
The total size of the list of color names is too big. Please either use shorter names or fewer colors.
You must leave at least two colors.
You must select some color as the current revision color by clicking its radio button.
Since colors have already looped, you cannot use the first color as the current revision color.
You can’t assign a key to a menu title or a menu item that has a submenu.
An uncompressed file cannot be protected. Please remove the password or click Don’t Compress.
Please either specify both the distribution list and the serial number if you want watermarks, or else clear out both fields if you do not want watermarks.
The distribution list is not correctly specified, please fix it.
The serial number should contain some letters or digits.
The file you selected has a full path that is more than 255 letters long. Please move the file to your default script folder, or to a location that is not so deeply nested in folders.
There is no valid path to a distribution list. Please either edit the list path, or clear out the list path and then click Set.
You must fill in the “Requested By” field before you can dismiss this dialog.
You must fill in the “Approved By” field before you can dismiss this dialog.
You can’t do watermark printing if the name list is empty.
If you are printing for only selected names, you must select at least one name.
The starting serial number you provided does not allow enough unique serial numbers for all the names in the distribution list. Please click Setup and fix the serial number.
There is an Action element that is too big to fit on one page. Please break it up.
The copy protection has been violated, and the program is not in the original installed folder. Please put it back and try again, or if necessary, reinstall.
Too many fonts: The script file format only allows 31 distinct font names, so some cheated element fonts will be lost.
You cannot have a SINGLE element with more than 2500 letters in it. If you are typing dialogue, you should split it up using the “Add Dialogue Paragraph” command.
Unable to join two elements whose combined size would be too big.
Something is dreadfully wrong, I can’t find a character name at the start of this speech!
Unable to paste that, ^0.
This script appears to have been saved with an older version of ^0 for the Mac that saved page colors in the wrong place. I have corrected the script, but you should make sure that any collaborators using Macs have the current version.
This script is marked View and Print only!
To get to a normal editable script, choose New from the File menu, or open any script that you’ve created.
This script has exceeded 40 pages, so the demo does not allow you to add more to it.
Your page breaks are now NOT multi-locked.
Your page breaks are now multi-locked.
You have a single left-right pair of two-column text that is too big to fit on a page. Please break it up so that pagination can work properly.
You have a split element that is too large for the parts to be rejoined. This will interfere with pagination and saving until you fix it.
The student version does not allow cheating pages.
You cannot cheat the last page, only a page that ends in an actual page break.
Before overriding a number, you must put the insertion caret into a numbered element: scene heading, scene information, or act information.
In order to use this function, you must position the insertion caret in the element that’s either just before or just after the page break you want to change.
You can ONLY cheat the headers of hard page breaks (Forced, Fixed, or Locked Pages).
That was not the correct password, try again.
The next time you save this script, it will go in the default script folder rather than its former location. This is to ensure that you don’t lose the script when you throw away the demo.
Normally, I would set this script so that future saves would go into the default script folder, but there is already a script of the same name there. Be careful that you don’t lose this script when you throw away the demo.
You did NOT type the same password twice!
Please try again.
No breakdown tags were in the script.
You CANNOT tag items in dialogue.
You CANNOT tag more than 255 characters.
Do you want to consider characters that are in a scene but do not have dialogue?
Do you REALLY want me to remove all character lists from under each scene heading? This is NOT needed to regenerate your lists.
Leave scenes unlocked here, so you can use Lock the Script later?
Leave pages unlocked here, so you can use Lock the Script later?
Locking the script is done once the script has achieved an active Production status, and we do not ever recommend that you lock a Spec script! Continue anyway?
You have NOT yet removed all current Revision Marks and/or fixed the Headers! Changing the Draft Color in this state will cause existing pages to pick up the new Revision Draft Color!
Are you SURE you want to continue?
Are you sure you want to forget your custom keyboard shortcuts, and revert to the factory standards?
Are you sure you want to discard all keyboard shortcuts?
Some groups are collapsed. Do you want me to expand them before printing?
You very RARELY ever want to unlock the script unless revisions have reached a point where you want to reissue a full script and discard all previous colored pages.
Is that what you want to do?
Would you like me to print out all the Characters in the order in which they speak in the script, rather than grouping all of each Character's dialogue together?
Load User Lists along with formats?
Lock the Dialogue Numbering so that any additional speeches will be numbered as A-speeches?
Multi-Lock the Dialogue Numbering so that any additional speeches will be numbered as AA-speeches?
Unlock all Multi-Locked Dialogue Numbers so that they are numbered as A-speeches?
Unlock the Dialogue Numbering so all speeches will be numbered normally?
Adjust the numbering of all normally numbered speeches that follow this one?
Changing the number of this scene heading may change the numbers of any following scene headings!
Continue anyway?
Changing the number of this act may change the numbers of any following acts!
Continue anyway?
Changing the type of this page will affect the numbers of all following pages!
Continue anyway?
Sorry, that was not the correct password.
Try again?
Could not replace the File; File is busy.
Could not replace File.
A Dialogue element must be preceded by a Character Name or speech. In order to do this conversion, I’ll have to insert a blank Character Name element before the Dialogue element.
A Parenthetical element must be preceded by a Character Name or speech. In order to do this conversion, I’ll have to insert a blank Character Name element before the Parenthetical element.
That page number is not in the document.
Sorry, but that was not the correct password, and you’ve tried three times.
As you requested, the Set List has been placed on the clipboard. You may now paste it into another program for further manipulation and printing.
There isn’t enough room for the main text column on the rundown sheets. Please adjust the box width or page layout.
I can’t delete that character name element, because doing so would result in a speech without a name.
If you only want to cheat the margins of an element, you may find it more convenient to do it by dragging the margin tabs on the ruler bar.
Some elements of this script had incorrect side margins, and had to be corrected. This can happen when you change paper sizes.
This will restore all hint dialogs that you already told me not to display.
Is that what you want?
That is not a correct serial number.
To avoid having the Dialogue and Character Names overlap one another, I am setting the left margin of Character Names to match the left margin of Action, and the right margin of Character Names to match the left margin of Dialogue.
Reset the left margin of all Character Names to place them over Dialogue?
Sorry, the element that the bookmark pointed to seems to be missing. Would you like to delete the bookmark?
I can’t find the Quick Help/Name Bank tool.
There is not enough free memory to open the Quick Help/Name Bank tool. Quitting other applications, if any, may help.
Unable to open the Quick Help/Name Bank tool, ^0.
Sorry, I was unable to cheat enough to preserve the page count.
Since the program is set to automatically Update Headers on Revisions, be aware that any changes you make to this page AFTER overriding its header will cause the page’s header and revision color to revert back to the currently active header and color.
This A-page is considered revised because of a preceding flexible A-page, so you must Fix A-Pages before overriding the page header.
Since changes in index cards do not affect your script until you click Done, they will not be saved by timed backups. Therefore we advise you not to spend long periods editing in index cards.
By checking this option, an A-scene between scenes 12 and 13 will be numbered as 13A rather than 12A.
This is a very NON-STANDARD way of numbering A-scenes, and we HIGHLY recommend that you verify that your production manager or 1st AD REALLY wants this.
Scene Character Lists will take up a minimum of one extra line per page that they are added to, so they will almost surely affect current page breaks.
If you are trying to make separate Action paragraphs, it is better to use the ordinary return or enter key rather than using a hard return.
If you are trying to make separate Dialogue paragraphs, it is better to use the Add Dialogue Paragraph command on the Edit menu rather than using a hard return.
Do you want to remove ALL individual Line Spacing Cheating before proceeding to the Page Layout Menu?
Should I REALLY remove all current Revision Marks?
You should ONLY lock revision marks if you want to have multiple revision marks on the same line, and this is generally used only in animation scripts due to faxing overseas!
So, should I REALLY lock all revision marks?
You have selected Portrait printing, but your printer is currently set up for Landscape. Please change the printer orientation to Portrait.
You have selected Landscape printing, but your printer is currently set up for Portrait. Please change the printer orientation to Landscape.
Replace existing title page?
You cannot edit a script with hidden elements.
Do you want to un-hide all elements?
Turn on AutoRevision Marks?
Do you really want to unlock your multi-locked page breaks?
Add a Forced Page Break?
Do you need editing privileges on this script?
I give up, you have too many windows to arrange on this monitor.
Your colors are set not to loop, but the current draft color is beyond the number of basic colors.
Either make the colors loop, or add more colors.
Your colors are set not to loop, but the next draft color will be beyond the number of basic colors.
Before starting a new revision, you should go into Set Revision Draft Colors and make the colors loop or add more colors.
You can’t replace the current script with an exported version of itself. Please try again, saving with a different name or different location.
Counted ^0 words in the selection.
Counted ^0 words in the script.
There is a new feature that draws red underlines under misspelled words. Do you want this feature turned on? (You can turn it off later using the Preferences dialog.)
